Functioning technology. Healthy soil. Lower environmental impact. With our water-based lubricant substitutes, we help farmers and foresters to operate their machinery efficiently, effectively and in an environmentally friendly manner. Whether fluids for harvesting machines, chainsaw adhesive oil for harvesters or gear oils for tractors – our smart fluids replace conventional products without sacrificing performance. They are biodegradable, flame-retardant and free from mineral and bio-oil. Ideal for use in water protection areas, forest areas or near bodies of water. Together with you, we accompany the transformation of your processes: with analysis, individual product selection, technical support and on-site training.
Together with our partner TotalEnergies, our goal and aspiration is to completely replace all oil-based substitutes in a machine with water-based fluids from a uniform base. In this way, we prevent cross-contamination and ensure maximum purity and safety in all application scenarios.
15 minutes
Specific options
Non-binding
Our cooling lubricant solutions combine lubrication, cooling and protection in a water-based and environmentally friendly product. Without oil, but with full performance. For grinding, drilling, milling and more.
Chainsaw fluid ensures optimum lubrication, reduced wear and a clean cut – even under heavy loads and in different weather conditions.
Richard Müller, Managing Director, Hotel Müller Hohenschwangau
15 minutes
Specific options
Non-binding
Our fluids quickly biodegrade and reduce the risk of contaminated sites or contamination through leaks – especially when used in forests or near bodies of water.
Many regions require biodegradable lubricants. Our products meet this criterion.
Our transformation support makes the changeover quick and safe. Compatibility tests, laboratory analyses and pilot conversions included. More about our transformation service
Our substitutes are flame-retardant and reduce the risks of hot surfaces or engine heat build-up.
Long service life, low wear and high viscosity stability: our fluids are smart.
Markus Köpf, forestry contractor, Forstbetrieb Markus Köpf
15 minutes
Specific options
Non-binding
In our brief discussion, you describe your current situation – and receive a non-binding initial assessment of how your processes can become oil-free, safe and more efficient.
Fluid Competence accompanies you reliably with our partner TotalEnergies. We are there for you at every step of the transformation – from the initial analysis to the successful switch to high-performance, water-based substitutes. Our transformation service combines technical expertise with practical support – so that you can concentrate on the essentials. We remain at your side even after the changeover: with regular laboratory analyses and targeted adjustments, we ensure that your processes remain powerful and efficient.
In our case consultation, you describe your situation to us and receive a non-binding initial assessment of your transformation potential.
15 minutes
Specific options
Non-binding
Together we analyze your machines, your processes and the requirements of your industry. The aim is to provide a reliable basis for decision-making.
After the analysis, we put together a concept for you. Your transformation plan contains time frames, responsibilities and specific measures.
The system setup is the central technical step in your changeover. We clean, check and fill your systems – structured, documented and accompanied on site.
The use of smart fluids also changes your requirements and specifications. We help you to minimize all follow-up costs – in a structured and fully documented manner.
After the changeover, we ensure that your systems continue to run optimally in the long term. With monitoring, laboratory analyses and targeted adjustments, we get the best out of your fluid.
We, Fluid Competence, develop water-based cooling lubricants and other technical functional fluids. Each product is individually and reliably adapted to our customers.
Our water-based smart fluids combine cooling, lubrication and rinsing action in one fluid. Without mineral or bio-oil. Developed in the laboratory, tested in practice, ready for use in all machining processes.
Our oil-free protective fluids prevent corrosion and frost damage – ideal for cylinders, machine parts or complete systems.
Our special fluids for slideways and bed ways offer maximum adhesion with minimum wear – completely without mineral base oils. Ideal for CNC systems and machining centers.
Our oil-free fluids for chainsaws offer reliable lubrication and high adhesion. Whether in forestry operations or private use, they offer maximum material compatibility and are biodegradable.
In agriculture, machines often come into direct contact with sensitive ecosystems – e.g. when working on the edges of water bodies, in water protection areas or when spraying. Water-based, biodegradable lubricants minimize the risk of soil or groundwater contamination in the event of leaks. They are also much safer for humans and animals as they leave no toxic residues.
Our lubricants offer comparable or even better lubrication performance than conventional oils – even under high loads, dust, heat and continuous operation. They reliably protect bearings, gearboxes and hydraulic systems against wear and deposits. At the same time, they help to extend maintenance intervals and reduce operating costs – a major advantage during seasonal peaks.
Rapidly biodegradable chainsaw oils are mandatory, especially in protected areas and spring areas. Municipalities and public clients are also increasingly stipulating the use of environmentally friendly fluids. Our products meet all relevant standards and eco-label criteria such as the EU Ecolabel or Blue Angel, which means you are also on the safe side from a regulatory perspective.
We work with you to analyze your requirements, check material compatibility and select the right product. In the next step, we accompany the initial changeover – including machine cleaning and initial filling. Training for users and close monitoring in the first few weeks ensure that everything runs smoothly. We are also available afterwards for subsequent deliveries, analyses and advice.
Yes, our water-based fluids are generally very compatible with existing systems. Careful cleaning and testing of sealing materials is important. We have already successfully carried out numerous conversions, even in older machinery – such as tractors, cable winches or forwarding tractors. Talk to us – we will test your machines individually.
Our products are generally stable for 12 to 24 months, provided they are stored correctly. Ideally in closed original containers, cool, dry and protected from direct sunlight. For customers with seasonal requirements, we also offer take-back and storage concepts – including recycling and reprocessing of leftover stock.
| Feature | Oil | Organic oil | Smart Fluids | |
|---|---|---|---|---|
 | Flammability |  Flammable - high fire risk |  Low, but not ruled out |  Non-flammable - water-based eliminates risk |
 | Corrosion protection | Agent - basic protection, reacts with water |  Medium to high - tends to hydrolyze in damp conditions | Very high - molecular barrier prevents corrosion |
 | Environmental compatibility | Stressful - Difficult to break down | Biodegradable, but unstable | Biodegradable - residue-free and stable |
 | Health risks | Toxic vapors possible | Low, but ageing can release unstable compounds | None - No vapors or residues |
 | Storage stability | High - but sensitive to contamination | Limited - hydrolysis and oxidation possible | Very high - additives ensure long-lasting stability |
Good at high temperatures, limited at low temperaturesMedium - viscous at low temperaturesBroad spectrum - optimized viscosity
Regular resharpeningFrequent, due to shorter change intervalsValuationLow, generally up to 30% longer terms
Regular resharpeningRegular resharpeningUp to 40% lower tool costs
High risk due to contamination and terminationMedium risk due to contamination and terminationNoneHigh, high flammability and health risksMediumLowInexpensiveMedium to high - depending on the qualityMediumFlammable - high fire risk
Low, but not ruled out
Non-flammable - water-based eliminates risk
Agent - basic protection, reacts with water
Medium to high - tends to hydrolyze in damp conditions
Very high - molecular barrier prevents corrosion
Stressful - Difficult to break down
Biodegradable, but unstable
Biodegradable - residue-free and stable
Toxic vapors possible
Low, but ageing can release unstable compounds
None - No vapors or residues
High - but sensitive to contamination
Limited - hydrolysis and oxidation possible
Very high - additives ensure long-lasting stability
Good at high temperatures, limited at low temperatures
Medium - viscous at low temperatures
Broad spectrum - optimized viscosity
Regular resharpening
Frequent, due to shorter change intervals
ValuationLow, generally up to 30% longer terms
Regular resharpening
Regular resharpening
Up to 40% lower tool costs
High risk due to contamination and termination
Medium risk due to contamination and termination
None
High, high flammability and health risks
Medium
Low
Inexpensive
Medium to high - depending on the quality
Medium
In our brief discussion, you describe your current situation – and receive a non-binding initial assessment of how your processes can become oil-free, safe and more efficient.
